Zenoah BCZ4000DW Owner's Manual page 2

BCZ4000DL / BCZ4000DW / BCZ4200CL
EC DECLARATION OF CONFORMITY
(Applies to Europe only)
The undersigned manufacturer,
declares under sole responsibility that the following products referred to in this
declaration conform with the requirement of the following COUNCIL'S DIRECTIVE.
The products referred to are :
This declaration conform with :
Date :
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Person authorised to compile the technical file :
GB-2
Husqvarna Zenoah Co.,Ltd.,
1-9, Minamidai, Kawagoe, Saitama, Japan,
DESIGNATION
MANUFACTURER
MODELS
SERIAL NUMBERS DATING : 2010 and onwards
DIRECTIVE 2006/42/EC
(The following standards have been applied: ISO 12100-1,-2, FprEN 15503: 2009)
DIRECTIVE 2004/108/EC
(The following standards have been applied: EN 61000-6-1, EN 55012 (CISPR 12: 2005))
DIRECTIVE 2000/14/EC
conformity assessment procedure followed ANNEX V
(The following standards have been applied: ISO 11094)
DIRECTIVE 2002/88/EC
ENISO 11806
29 December 2009
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Bo R Jonsson
SE-561 82 Huskvarna, Sweden
: Brushcutters
: Husqvarna Zenoah Co., Ltd.
: BCZ4000DL
BCZ4000DW
BCZ4200CL
(The year is cleary stated on the rating plate,
follwed by the serial number)