Download Print this page

Using Picture-In-Picture; Activate Pip From The Program Guide; Move The Pip Screen - Cisco Explorer 8300 User Manual

Hide thumbs

Advertisement

Table of Contents

Using Picture-In-Picture

Activate PIP on Your TV
While watching a program, press PIP On/Off
to activate the PIP screen.
Notes:
To pause or record the video in the PIP
screen, you must fi rst swap it to the
Main screen.
You can only use the dedicated DVR keys
(Pause, Rewind, Fast-Forward) to control
the program shown in the Main screen.
To change the channel in the PIP screen,
use PIP CH+
Tip: While the PIP screen is activated, press INFO
banner for both the Main screen and the PIP screen.

Activate PIP From the Program Guide

From the Program Guide, press Exit
Guide, and then press PIP On/Off
PIP from full-screen video.
Swap the Main and PIP Screens
To swap the TV program that is in the PIP screen
to the Main screen, press PIP Swap
Note: You will only hear the audio for
the program shown in the Main screen.

Move the PIP Screen

To move the PIP screen clockwise to a
diff erent corner of the Main screen, press
PIP Move
to any of the four corners of the Main screen.
14
and PIP CH-
. You can move the PIP screen
.
or Guide
to activate PIP. You can only activate
.
PIP
Main
Screen
Screen
to display a channel
to close the Program
PIP
Main
Screen
Screen

Advertisement

Table of Contents
loading

  Also See for Cisco Explorer 8300

  Related Manuals for Cisco Explorer 8300

This manual is also suitable for:

Explorer 8300hd