Table of Contents
Advertisement
Copy a Recording to a VCR Tape
1. Connect the VCR to the OUT 2 connection on the back of the Explorer
DVR. See page 12 for more information.
2. Make sure that a tape is in your VCR and that the VCR is set to record.
3. Press List
screen appears.
4. Press Move Up
to highlight the recording you
want to copy to the VCR. Make sure to
select a program that is not currently
being recorded.
5. Press Select
Program Options screen appears.
6. Press Move Up
to VCR."
7. Press Select
screen appears.
8. Make sure your VCR is properly
connected to your DVR outputs, and
press Record on your VCR.
9. Press Start copy
begins copying to VCR tape. The
Recorded List displays the VCR symbol
for the recording that is copying to
VCR.
Note: You can watch the copying in
progress through the PIP.
. The Recorded List
or Move Down
. The Recorded
to highlight "Copy
. The Copy to VCR
. The recording
A
Recorded List
"Design On A Dime"
Save: Until Erased
Recorded Programs
Date
Friends
Wed 11/10
ER
Thur 11/11
Design On A Dime
Mon 11/15
Divine Design
Tue
11/16
NYPD Blues
Wed 11/17
Options/Play
Scheduled Recordings
Recorded Program Options
"Design On A Dime"
Recorded: Mon 11/15
12:00pm 30min
Save: Until Erased
Options
Erase
Change save time
Copy to VCR
Play "Design On A Dime"
Block "Design On A Dime"
Choose highlighted item
Copy to VCR
"Design On A Dime"
Recorded: Mon 11/15
12:00pm 30min
Save: Until Erased
Connect VCR inputs to cable box outputs "OUT 2 (VCR)."
Place a blank tape in your VCR.
Set your VCR input to record from the cable box.
Press RECORD on your VCR.
Start copy
Time
Length
8:30pm
30min
9:00pm
1hr 0min
12:00pm
30min
9:00pm
30min
10:00pm
1hr 0min
Preferences
Recorded List
Cancel copy
13
Advertisement
Table of Contents
