Selecting The Record Mode - Olympus E-620 Instruction Manual

RAW
This is unprocessed data that has not undergone changes in white balance, sharpness,
contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data
cannot be displayed on a different camera or by using common software, and it cannot be
selected for print reservation. RAW files are assigned an ".ORF" file extension. RAW images
can be edited with this camera and saved as JPEG data. g"Editing still images" (P. 87)

Selecting the record mode

JPEG
For JPEG, you can register 4 combinations of images sizes (Y, X, W) and compression
rates (SF, F, N, B) from the 12 total combinations available. g"K SET" (P. 104)
When you select the X or W image size, you can further select the pixel size.
g"PIXEL COUNT" (P. 104)
JPEG+RAW
Records both a JPEG and RAW image at the same time each time you take a picture.
RAW
Records the image in RAW data format.
e.g.) The following 9 record modes are available when YF/YN/XN/WN are registered
RAW : RAW
JPEG : YF/YN/XN/WN
JPEG+RAW : YF+RAW/YN+RAW/XN+RAW/WN+RAW
Super control panel
Menu
TIPS
To quickly set the record mode:
j By setting [RAWK] to the < button, you can turn the
control dial while pressing the < button to change the record
mode.
Each time you press the < button, you can easily switch
between JPEG data only and JPEG and RAW data.
g"; FUNCTION" (P. 97)
To find out the file size/number of storable still pictures
for each record mode:
j "Record mode and file size/number of storable still
pictures" (gP. 138)
i p: [K]
MENU [W] [K]
OFF
arge
Normal
CARD SETUP
CUSTOM RESET RAW
PICTURE MODE F
GRADATION N
N
IMAGE ASPECT
N
BACK SET
4
67
EN