Attaching A Lens To The Camera - Olympus E-620 Instruction Manual

Attaching a lens to the camera

1
Remove the body cap from the camera and
the rear cap from the lens
2
Attach a lens to the camera
• Align the lens attachment mark (red) on
the camera with the alignment mark (red)
on the lens, then insert the lens into the
camera's body (1).
• Rotate the lens in the direction indicated
by the arrow until you hear it click (2).
• Make sure the ON/OFF switch is set
to OFF.
• Do not press the lens release button.
3
Remove the lens cap (3, 4)
Removing the lens from the
camera
While pressing the lens release button
(1), rotate the lens in the direction of the
arrow (2).
12
EN
2
1
Rear cap
Alignment mark (Red)
4
2
Body cap
Lens attachment mark
(Red)
2
1
3
Lens cap
3
2
1
Lens release button
1