Table of Contents

Advertisement

Slow synchronization (2nd curtain) #SLOW2/2nd CURTAIN
2nd curtain flash fires just before the shutter closes. Changing the flash timing can create
interesting effects in your picture, such as expressing the movement of a car by showing the
tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out.
In S/M mode, the flash always fires.
When the shutter speed is set to 2 sec.
2nd curtain
seconds
Shutter closes
Slow synchronization (1st curtain)/Red-eye reduction flash !SLOW
While using slow synchronization with flash shooting, you can also use this function to
achieve red-eye reduction. When shooting a subject against a night scene, this function
allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to
shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction.
Hence, only 1st curtain synchronization setting is available.
Fill-in flash #
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on
the subject's face (such as shadows from tree
leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting
(especially fluorescent light).
x
Notes
• When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject
against a bright background with the fill-in flash, the background may be overexposed. In this
case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash
mode. g"Super FP flash" (P. 80)

Flash off $

The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised.
g"AF ILLUMINAT." (P. 95)
2 seconds
2
1st curtain flash fires
2nd curtain flash fires
0
1st curtain
seconds
Shutter fully opens
5
75
EN

Advertisement

Table of Contents
loading

Table of Contents