Table of Contents

Advertisement

Shooting

1
Place the AF target on the
subject while viewing through
the viewfinder
2
Adjust the focus
Press the shutter
button halfway.
AF target
AF confirmation mark
• The focus is locked when a beep tone is outputted. The AF confirmation mark and the AF
target in focus light up in the viewfinder.
• The shutter speed and aperture value that have been set automatically by the camera are
displayed.
• The super control panel is not displayed while the shutter button is pressed.
3
Release the shutter
Press the shutter button all
the way (fully).
• The shutter sounds and the picture is taken.
• The card access lamp blinks and the camera starts recording the picture.
Never remove the battery or card while the card access lamp is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
16
EN
Viewfinder
Shutter speed
Viewfinder
Super control panel
AUTO
2009. 03.16
Aperture
value
Normal
Shutter button
Card access
lamp
250
F5.6
AF
OFF
arge

Advertisement

Table of Contents
loading

Table of Contents