Turning On The Power; Notes On Power-On - Fujitsu FPC-M80000 User Manual

4 Turning On the Power

This section explains how to turn on the power.

Notes on power-on

If nothing is displayed on the screen, check if the display cable is properly connected.
In the case that the screen is not displayed in the center, adjust it using the display.
When the power-on self-test (POST) detects an error, an error message is displayed.
When the power cable of the display is connected to the PC, the display power is turned on or
off automatically when the PC power is turned on or off. Therefore, once the power switch on
the display is pressed, subsequent operation is not necessary. Therefore, the display power
is automatically turned on each time the power switch on the PC is pressed as in Step 2 below.
When turning on the power after turning it off, or turning off the power after turning it on, wait
at least 10 seconds.
Although the screen may be distorted temporarily or display horizontal lines at the beginning
of a screen display (such as the Windows startup and shutdown screen) or when the display
mode is changed (for example, from the power-saving mode to the normal mode), this does
not indicate a fault.
Turning on the power
CAUTION
1 Press the power switches on the display and other peripheral devices.
At this time, nothing is displayed on the screen.
14
Do not carry or subject the PC to shock or vibration while the PC is on.
Otherwise, a fault may occur.