Table of Contents
Advertisement
6
Install the internal hard disk on the PC unit.
Secure the disk with the screw removed in Step 4.
7
Connect flat cables.
The connector of the primary IDE cable, which is marked "To the motherboard" in the figure
below, is connected to the primary IDE connector in the PC unit.
When installing the first disk, connect the master connector of the primary IDE cable to the
connector of the internal hard disk.
When installing the second one, connect the intermediate connector (marked "SLAVE" in the
figure below) of the primary IDE cable connected to the first hard disk to the connector of the
internal hard disk.
<Primary IDE cable>
To the motherboard
44
SLAVE
MASTER
30cm
Red line
Advertisement
Table of Contents
