Wet Connections; Condensation Drainage - Ferroli 20-V Installation And Operation Manual

WET CONNECTIONS

The unit has wet connections with threads as those listed in the table below and flat seals.
PIPE INSULATION
1.The insulation must cover both the water inlet and outlet pipes as illustrated.
2.Use polyethylene insulation at least 8 mm thick.
WATER INLET
WATER OUTLET
USCITA ACQUA
INGRESSO ACQUA
NO

CONDENSATION DRAINAGE

The following procedure makes sure that any condensation that forms flows correctly out of the machine.
1. Connect the condensation drain pipe.
2. Make sure that the drain pipe has no traps or elbows that prevent the condensation from flowing out.
3. Make sure that the condensations flows out correctly by pouring water into the tray and ensuring that it flows out of
the drain pipe installed.
MACHINE INSTALLATION
Model
20-V
30-V
40-V
WATER INLET
INGRESSO ACQUA
INSULATION
ISOLAMENTO
Couplings
1/2"
WATER OUTLET
USCITA ACQUA
INSULATION
ISOLAMENTO
SÌ
WATER INLET WATER OUTLET
INGRESSO ACQUA
USCITA ACQUA
NO
11