Table of Contents
Advertisement
DESCRIPTION OF DISPLAY MARKS
DISPLAY MARK
Measurement is begun, but the pressure was in-
sufficient.
Appears when the blood pressure could not be
measured accurately. (Some noises were de-
tected by the movement of arm during measure-
ment.)
Appears when the pulse could not be measured.
Appears when the batteries become weak.
Device has a trouble.
CONDITION/CAUSE
— Eng 7 —
CORRECTIVE ACTION
Repeat measurement again.
Repeat measurement again.
First, exhaust air from the cuff, reapply the cuff
properly and remeasure.
Repeat measurement again.
Replace the batteries.
Ask purchased shop.
Advertisement
Table of Contents
