Helpful Hints - Keurig B3000 Use & Care Manual

If no K-Cup is detected the display will show:
NO K-CUP DETECTED
CONTINUE ANYWAY?
NO
Either insert a K-Cup or press YES to continue.
NOTE: Do not remove the foil lid or
puncture the K-Cup ®
Choosing option "c" the display will read:
SELECT BREW SIZE
If no mug is present or not detected on the
drip tray it will display:
PLACE YOUR CUP
OR SELECT CONT.
Take the appropriate action.
Four brew size options are available, they are
from left to right 4 oz, 6 oz, 8 oz and 10 oz and
are indicated in the cup and mug icons. 8 oz is
the standard brew size, 4 oz and 6 oz are more
robust and 10 oz gives a milder brew.
5. Press your brew size selection.
The brewer display will indicate:
BREWING
CAUTION: There is extremely hot water in
the K-Cup Holder during the brew process.
To avoid risk of injury, do not lift the
Handle or open the K-Cup
during the brew process.
6. There may be a short pause before the
brewing process begins. The entire brew
YES
portion pack.
Insert K-Cup
READY
® Chamber
process lasts for approximately 40 to 52
seconds (depending upon brew size select-
ed) and ends with a burst of air to remove
all liquid coffee or tea from the KCup
The button below your selected brew size
will remain lit until the brew is completed
and the following is displayed:
KEURIG BREWED
7. Enjoy your first cup of Keurig Brewed
gourmet coffee or tea!
8. The Brewer will be ready again for use in
approximately 20 seconds.
NOTE: Following the brew, your Brewer will fill
in preparation for the next brew. The pump will
make a vibrating sound. This is normal.
The brewer will then revert to its idle state
and indicate:
READY – CHOOSE K-CUP
LIFT HANDLE
Español
Français

Helpful Hints

1. Keep your Brewer turned 'ON' at all
times. To brew a fresh cup of coffee or tea
anytime you want, we suggest you keep
your Brewer turned 'ON' all the time.
2. Keurig requires the use of filtered water
on this s brewer. We recommend the
OmniPure Filter Kit, Keurig PN 5025.
3. Plug Brewer into its own grounded outlet.
If the electric circuit is overloaded with
other appliances, your Brewer may not
function properly. If possible, The Brewer
should be operated on its own circuit,
separate from other appliances. A separate
circuit with a GFCI is recommended.
4. Brewing into a travel mug. To brew into a
travel mug, simply lift and rotate back the
drip plate housing till it rests against the
drip plate back wall then place travel mug
on lower drip plate and commence brew.
® .
ENJOY!
®
HOT
WATER
9