Page 1
B1000 B REWER & C UIDE Part # 71-000039-002 Coffee House Taste by the Cup® Patents Pending Sanitation Approved to NSF Standards Revision F, February 2003 Page 1...
Page 2
Welcome to the Keurig family! On behalf of our entire team, I would like to thank you for purchasing a Keurig B1000. Keurig's objective is to provide you with the finest single-serve coffee system available so that you can enjoy Coffee House Taste by the Cup®.
Safety Operations and Use IMPORTANT SAFEGUARDS for your Keurig B1000 Brewer: 1. Read all instructions. 2. Do not touch hot surfaces. 3. To protect against electric shock, do not place cords, plugs or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children.
Controls and Features Your Keurig brewer includes: 1) a control panel that controls operation and shows you the status of your brewer, and 2) a water tube that shows the amount of water and water system status. Water Tube Lights...
Controls and Features Custom Brew™ by Keurig Want a stronger, more intense coffee taste? Try Custom Brew™ by Keurig. Custom Brew allows you to customize your coffee experience, resulting in a more intense cup (less than the standard 8 oz.).
Brewer Setup To operate your new Keurig brewer, please follow these instructions. Also follow these instruc- tions if you emptied the brewer of water (for example to move it) before operating it again. Step 1. Remove tape from drip tray/plate and place drip tray/plate at the base and in front of the brewer.
• Please do not open foil lid on K-Cup • Place a mug on the drip plate • Press the green “Brew” button • Enjoy your first cup of Keurig Brewed® coffee! Figure 3 Revision F, February 2003 Page 8...
Brewer Operation Brewing Instructions 1. Determine that the G Ready light 2. Place your cup or mug on the drip REEN is on. tray. 6. Push in the brew drawer (G light REEN 3. Select a K-Cup of your choice. Do not will now flash).
Draining / Storage Draining your Keurig brewer: You can drain the water reservoir in your Keurig brewer if you want to move it, or simply change the water. drain your Keurig brewer, please follow these instructions: Step 1. Turn power “OFF” and unplug the brewer. Let it sit for a minimum of 2-3 hours to allow water to cool.
Now, reassemble unit by placing the K-Cup holder back into place. Please ensure that the K-Cup holder is in position. • Replace exit needle cleaning tool into its housing on the bottom of the drip tray. • The B1000 is now ready to use. Revision F, February 2003 Page 11...
To install filter, open lid on top of B1000. Place the filter in the opening. Replacement Schedule: To maintain optimal performance the water filter for your B1000 should be replaced after it has filtered 35 gallons or at 6 month intervals, which- ever comes first. Keurig authorized distributors can order replacements through Keurig Customer Service, 1.888.CUP.BREW, referencing part # 76-000107-001.