Table of Contents
Advertisement
Mercury 8-Line Synthesised
Turning the Pager "OFF"
3.1.7
1.
Press the Menu Key
2.
Press either of the Arrow Keys
3.
Press the Read Key
3.1.8
Audio or Vibration Alert (Vibration mode for discreet alerts)
With the Pager ON:
1.
Press the Menu Key
2.
Using the Arrow Keys
3.
Press the Read Key
flash.
4.
If you wish to change, Press either of the Arrow Keys
setting is found. Choose either
5.
Press the Read Key
3.1.9
Back-light (for viewing at Night)
The backlight is manually turned on.
On receipt of a message the backlight will not be on.
1.
Press and hold the Menu Key
NOTE: To extend the battery life, the Backlight will automatically turn "off" after 15 sec.
2.
To turn the backlight off, you can wait for it to timeout, or hold the Menu Key
until the Backlight turns off.
3.1.10
Setting the Alarm
With the Pager ON:
1. Press the Menu Key
2. Using the Arrow Keys
The Alarm Settings Menu will be displayed.
3. Use the Left Arrow Key
to increase the value of a field.
4. The Read Key
5. Settings will be saved when you press the Read Key
8
Page
once. The Function Settings Menu is displayed.
until the Power Off
once to confirm. The pager will then turn off.
until the Function Settings Menu is displayed.
select the
once. The alert function the pager is currently set to will
for beep or
once and this will change to the mode that is flashing.
until the Back light comes on.
until the Function Settings Menu is displayed.
select the
to decrease the value of a field and the Right Arrow Key
will move you along to the next character for editing.
icon flashes.
icon.
until the correct
for vibrate or
icon. Press the Read Key
to the end of the line.
©
CommtechWireless
Manual
for mute.
once.
Advertisement
Table of Contents
