Turning Your Pager On; Turning Your Pager Off; Using The Function Menu; Message-Status Screen - commtech wireless 7950 V2 User Manual

IMPORTANT: Some features, icons, and function menus may not be available on your pager, depending on how the
pager was programmed. This document covers all features and assumes that no functionality has been disabled.

Turning Your Pager On

1. Press for 3 seconds. A start-up screen is momentarily displayed and your pager activates the currently
chosen alert. When the pager is on but no activity is taking place, the screen turns off.
NOTE: Press any button to stop the alert.

Turning Your Pager Off

1. Press to display the Function menu.
2. Press to move the cursor to ( ).
. "TURN PAGER OFF?" displays.
3. Press
4. Press again to turn the pager off. The pager turns off and the screen goes blank.

Using the Function Menu

The Function menu provides access to the many features of your pager through the use of symbols and prompts.
1. Press to display the Function menu. When the Function menu is initially displayed,
indicate the location of the cursor.
Example of the Fully Displayed Function menu:
2. Press , to move the cursor within the Function menu. As you move through the Function menu, the
pager function symbols flash to indicate the location of the cursor.
3. To exit from the Function menu without making any changes, press

Message-Status Screen

The Message-status screen shows the current status of your messages. For example, unread messages are indicated
by a flashing  symbol, locked messages are indicated by
The Messages-status screen also displays the time, date, and any activated pager settings. The Message-status
screen can be accessed by pressing
Example of the Message Status screen:
4  7950 V2 Pager
.
or from the Standby screen.
flashes to
.
User Guide for 7950 V2