Mercury 8-Line Pager Operation; Functions; Turning The Pager "On; Reading A New Message - commtech wireless Mercury 8-Line User Manual

Mercury 8-Line Synthesised
3.

MERCURY 8-LINE PAGER OPERATION

3.1

Functions

Turning the Pager "ON"

3.1.1
To turn the pager ON, follow these steps:
1. Insert the battery into the pager.
2. Press the Read Key
audio alert will sound or the pager will vibrate.
To stop the Audio Alert or Vibration Press any key. If no key pressed during
alert period, the alert stops automatically and the message is assumed to be an
unread message.
3. To check for Unread messages and Total messages Press the Read Key
again.
4. To read existing messages Pressing either of the Arrow Keys
between messages. Press the Read Key
in detail.
3.1.2

Reading a New Message

When the pager is being used it will typically have a blank screen when a new message is
received.
The pagers will either sound the audio alert or vibrate and the new message will be
displayed on the screen.
1. To stop the audio alert or vibration Press the Read Key
screen will go blank.
2. To check the message Press the Read Key
To read previous messages Use the Arrow Keys
stored messages. Press the Read Key
detail.
3. To return to the Standby Screen, press the Menu Key
3.1.3

Deleting Individual Messages

Go to the message to be deleted. To delete it:
 Press the Menu Key
 Using the Arrow Keys
 Press the Read Key
6
Page
making it flash.
, until the screen displays the Start-up message. The
again to view the selected message
once.
again to view the selected message in
once. The Delete Menu will be displayed.
choose the Delete Message
to confirm your selection.
Manual
will toggle
again and the
to scroll through the
twice.
icon, by
© CommtechWireless