Example Of Connecting With Personal Computers - Panasonic PT-D7500E Operating Instructions Manual

Connection

Example of connecting with personal computers

PC
I/F
Attention
• When the main power of the main unit is turned off, also turn off the power of the PC.
• When stacking projectors using RGB/YP
source and use RGB1 input for both projectors. When the RGB1 OUT is connected to the
external RGB monitor, the image quality will be almost the same as that of checking monitors.
Note
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
page 99.
• If your PC has the resume feature (last memory), the computer may not function properly until the
resume capability is disabled.
• The RGB 1 OUT (RGB 2) terminal will issue the signal that is connected to the input terminal of
RGB1.
24
IN OUT
REMOTE 1 REMOTE 2
S-VIDEO VIDEO
IN IN OUT R/P
R
IN OUT
REMOTE 1 REMOTE 2
S-VIDEO VIDEO
IN IN OUT R/P
R
Control PC
PC or color monitor
with RGB input terminals
RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R)
IN OUT SERIAL
RGB 1 IN RGB 2 IN / RGB 1 OUT
G/Y B/P SYNC/HD VD
B
RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R)
IN OUT SERIAL
RGB 1 IN RGB 2 IN / RGB 1 OUT
G/Y B/P SYNC/HD VD
B
P /YC C signals, divide the signals at the signal
B R B R