Panasonic PT-D7500E Operating Instructions Manual page 88

How to use network module (optional)
E-mail setting page (continuing)
Select the conditions for sending E-mail.
Error:
Warning LAMP1: remaining lamp service time has reached the
Warning LAMP2: remaining lamp service time has reached the
Warning input air Temperature:
Warning output air Temperature:
When all entries are
complete, press the Submit
button.
88
an error is detected by self-diagnosis:
value set in the field on the right.
value set in the field on the right.
temperature inside the projector has reached
the value set in the above field.
exhaust temperature has reached the value
set in the above field.
Select the conditions for sending E-mail.
Error:
Warning LAMP1: remaining lamp service time has reached the
Warning LAMP2: remaining lamp service time has reached the
Warning input air Temperature:
Warning output air Temperature:
To use two E-mail
addresses, enter the E-
mail address of the
destination recipient.
an error is detected by self-diagnosis:
value set in the field on the right.
value set in the field on the right.
temperature inside the projector has reached
the value set in the above field.
exhaust temperature has reached the value
set in the above field.