Advertisement
If a low battery condition occurs, you will see the following message:
LOW TX BATTERY!
Then after pressing the M key
UNIT: 1
Notes
1. If for any reason the transmitter a stop sending its check-in code every 10 seconds or the person wearing it
has stepped out range for more than three minutes, the TX MISSING alarm will be sounded. At this point,
after confirming that indeed the transmitter is missing, you are given the opportunity to perform a SEARCH
operation. Since the EM-900WA is equipped with a rechargeable battery, you simply carry the unit with you
on foot or on the dashboard of a car and search the immediate area. If you are within a reasonable distance
from the missing transmitter unit and you are not passing through the area at excessive speed, you should
hear a series of beeps at 10 to 20 seconds intervals when you're within range, which depends on terrain and
the presence of buildings and other objects that can block the signal path. Additionally, there will be an
indication of signal strength that becomes consistently higher when you approach the transmitter or lower
(and less frequent) when you move away.
2. The low battery alarm will be issued every 18 hours until the battery is replaced. Please do so as soon as
possible to prevent the transmitter in question from becoming inactive in the days or weeks ahead.
STATION ON/OFF
1 MON/NEW ENTRY
2 ON-OFF/VU LOG
Press '1' to MONITOR or ENTER NEW PROGRAM
Press '2' to TURN STATION ON – OFF or VIEW STATION LOG
(Press '2' to TURN STATION ON – OFF or VIEW STATION LOG)
•
This section is used to either turn STATION ON or STATION OFF. When disabled, (station off), all alarms from
that particular transmitter will be ignored. For example, it may be necessary to occasionally turn that particular
station off, disable a sensor from sending an alarm during maintenance or for any other reason.
ENTER STATION #:
(01 - 40)
Enter 01 (for station 01).
STATION: 01
Screen will then display
1 STATION ON - OFF
2 VIEW DATA LOG
Press '1' to CHANGE STAION CONFIGURATION from ON to OFF or OFF to ON
Press '2' to VIEW STATION LOG
(Press '1' to verify STATION setup)
•
STATION ON
9
Advertisement
