Advertisement
Enter the name of a location or any other description of less than 11 alpha characters
At this stage you're asked to enter alphabetic characters via the EM-900 WA keypad. Looking at the keypad, you'll
notice the additional alphabetic letters printed on numeric keys 2 through 9. To enter a letter, press the
corresponding key in quick succession in accordance with the placement of the character.
For example: for the letter "C" press the "2" key three times in a row. Use the "1" key for a space. In so doing you
can construct a name in upper case style only not exceeding 11 characters. Note: By simply pressing the * key,
the name field will be left blank.
Note:
Pressing the "0" key once will give you the exclamation (!) character.
Pressing the "0" key twice will give you the quotation (") character.
Pressing the "0" key 3 times will give you the pound (#) character.
Using this sequential method try entering the name "JOE SMITH".
In any of the program stages if an incorrect character has been entered, you can simply
press "R" to reenter information.
When you are finished with this process press the star key (
01 : JOE SMITH
Then you are given a choice of
1 ACCEPT
2 START OVER
Press '1' to ACCEPT STATION PROGRAM
Press '2' to START OVER from scratch
(Press '1' if program was correctly entered)
•
Screen will then display
1 MON/NEW ENTRY
2 ON-OFF/VU LOG
*
), the screen will then display...
5
Advertisement
