Configuring Multiview Settings; Figure 1-28 Multiview Settings Screen; Table 1-15 Multiview Fields - Honeywell HCX13MW Operator's Manual

Configuring Multiview Settings

44
Multiview enables you to set up your camera to deliver a web page showing streaming
images from up to nine cameras, simultaneously. For each of the nine display areas of
that page, you must specify the IP address, port, and label for the camera whose images
will show in that display area.
Figure 1-28 MultiView Settings Screen
Table 1-15 Multiview Fields
Field Description
IP address Specify the IP address of the camera. You may use a DNS text
name if you have a nameserver on your system.
port Specify the internet port of this display area's camera. Leave this
field blank if you are using the default internet port of 80.
label Specify the label shown under the image in this display area. This
need not be the name of the camera. You may use up to 31
characters.