Setting Access Hours; Updating Camera Firmware; Figure 1-19 Access Hours Dialog - Honeywell HCX13MW Operator's Manual

Setting Access Hours

Updating Camera Firmware

Document 800-01794 Rev C
05/09
Use the Access Hours dialog box on the Security screen to limit access to camera images
during a specified time.
Figure 1-19 Access Hours Dialog
You can limit access to camera images on weekends or weekdays (or both).
Set weekdays or weekends to on or off to allow or deny access to camera images for the
selected days. Alternatively, select timer, then specify the periods during which images
are accessible. Enter the start and stop times in 24 hour format (hh:mm). For example,
16:00 = 4 pm, 01:00 = 1 am). During off hours, camera images are accessible only to the
management user.
To update the firmware, click Browse... to find a firmware file.
Caution It is important that the camera does not lose power during this
process. The camera reboots after a successful update.
HCX Series Network IP Camera Operator Guide
35