BOMBARDIER EVEREST Operator's Manual page 30

Oil Injection Pump Adjustment
. . , CAUTION: The carburetor must
~
be adjusted before adjusting the
oil injection pump. Make sure the idle
speed is 2000 RPM.
To adjust:
Eliminate the throttle cable free-play by
pressing the throttle lever until a light
resistance is felt, then hold in place.
The aligning marks on the pump cast-
ing and lever must align perfectly. If
not, contact your dealer.
Injection pump should be adjusted by
your dealer.
Aligning
marks
Cooling System (UC models
only)
Check condition of hoses and clamps
tightness. Using a hydrometer check
that the anti-freeze solution is strong
enough for the temperature in which
the vehicle is operated.
O
NOTE: Should the coolant tem-
perature raise above recommend-
ed range 50°-80°C (120°-180°F), hose
off grime from the heat exchanger (un-
derneath the frame above the track).
28
Fan Belt
If the belt seems damaged or if tension
is incorrect, contact your dealer imme-
diately.
+
W A RNING: If fan protector is re-
moved, always reinstall after ser-
vicing.
Headlamp Beam Aiming
The angle of the headlamp beam has
been pre-adjusted prior to delivery.
Should you wish re-adjustment, place
the vehicle on a flat surface 7.6 m (25')
from a wall or screen.
TOP VIEW