Parking A Call - Siemens HiPath 500 User Manual

Enhanced phone functions
Step by Step
)56
0
(56
0
36

Parking a call

You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Prerequisite: You are conducting a call.
S
Press the "Consult" key. The LED flashes.
Enter the code.
9
...
Enter the number of the park slot (0 - 9) and make a note
of it.
You will hear a negative confirmation tone if the park
slot number you enter is already in use. Enter another
one.
\
Replace the handset.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The
phone is idle.
^
Lift the handset.
Enter the code.
9
...
Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
If a parked call is not picked up, it is returned to
the telephone from where it was parked after a
specific period of time (recall).