Conducting A Conference - Siemens HiPath 500 User Manual

Step by Step

Conducting a conference

In a conference call, you can talk to as many as four oth-
er parties at the same time. These may be internal or
external users.
^
Lift the handset.
j
Call the first party.
S
Press the "Consult" key. The LED flashes.
j
Call the second party.
[
Announce the conference.
T
Press the "Consult" key.
)3
Enter the code. The LED goes out.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress.
If the second party does not answer
T
Press the "Consult" key and wait two seconds.
or depending on the configuration
T
Press the "Consult" twice.
Adding up to five parties to a conference
S
Press the "Consult" key. The LED flashes.
j
Call the new party.
[
Announce the conference.
T
Press the "Consult" key.
)3
Enter the code. The LED goes out.
And so on...
Leaving a conference
\
Replace the handset.
You can only add parties to or remove them from
a conference if you initiated the conference.
Enhanced phone functions
37