Stelpro LCH48T User Manual

www.stelpro.com
User's guide
"LCH" series
LCH48T & LCH4800T models
Portable heater
Replacement component list included
This unit complies with
the CSA standards
WARNING WARNING WARNING WARNING
This product is designed and approved for use under normal, dry conditions. It is not intended for use or storage within damp and/or dusty
conditions. It should not be exposed to flammable liquids, combustible materials, corrosive, abrasive, chemical and/or explosive products such
as, but not limited to, paint, gasoline, chlorine, cleaning products, sawdust, etc.
When choosing a heater, assure that it is suitable to the application. Should your application possess any of the above-mentioned conditions,
then your product should be designed specifically to operate under those conditions. We highly recommend inquiring with your insurance
company, CSA or any other recognized equivalent, to assist you in your product selection. We encourage you to consult your local electrical and
building codes.
Stelpro Design inc. does not warrant their products should they be used under any condition to which their design is not intended, nor shall they
be held responsible for any incident arising as a result of improper use.
Please ensure that the plug of the unit is not impaired (color changes, rust, distorsion, etc.). It is important to inspect the plug and the electrical
outlet at least once a year, or once a month if they are used on a construction site. A damaged plug or outlet could cause a fire.
It is the user's responsibility to evaluate if the unit must be cleaned based on the amount of dirt accumulated on and inside air vents. Accumulated
dirt can lead to a component malfunction. It may cause a fire hazard if not installed and maintained in accordance with these instructions.
For further information or to consult this guide online, please visit our Web site.
INSLCH0211