Windows Nt 4.0 Audio Driver Installation - TMC MI5VP4 User Manual

Chapter 7 VIA Drivers Installation Guide

7.9 Windows NT 4.0 Audio Driver Installation

IMPORTANT: You should install the Windows NT 4.0 Service Pack 3 or
higher first before installing the VIA 686A PCI multimedia audio device
drivers. If you don't have Windows NT 4.0 Service Pack 3 or higher,
please contact your software vendor or download it from Microsoft's
web site.
To install the VIA 686A audio driver for Windows NT, follows the steps
below.
1. Click
Start Settings
2. Double click
Multimedia
3. Click .
Devices
4. Click .
Add
5. Select
Unlisted or Update Driver
6. Assuming "D:" is the CD-ROM drive, type
then click . Click
OK OK
7. Click to restart Windows NT and for changes to take
Restart Now
effect.
80
.
Control Panel
.
, then click .
OK
D:\VIA\VIA686A\winnt40
again.
MI5VP4 User's Manual
,