Analog Radio - Kenwood KDC-X700DAB Instruction Manual

ASW SELECT TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO,
SPORTS, FINANCE: Turn the volume knob to make a selection, then press
the knob.
" * " appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles broadcasting
an activated announcement type.
• Multiple announcement can be activated simultaneously.
• To deactivate, press the volume knob again ("
LIST UPDATE AUTO: Automatically update the DAB Service List when the power is turned
on. ; MANUAL: Updates the DAB Service List by pressing and holding
PTY WATCH Automatically switch from any source to Digital Radio ensembles
broadcasting a selected type of program.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M
(music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music), DOCUMENT
OFF: Cancels.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Digital Radio signal station time. ;
OFF: Cancels.
• Available Program Type:
SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, DOCUMENT
MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M
(music)
The unit will search for the Program Type categorized under [SPEECH] or
[MUSIC] if selected.
• If the volume is adjusted during reception of traffic information,
announcement or alarm, the adjusted volume is memorized automatically.
It will be applied the next time traffic information, announcement or alarm
function is turned on.
DIGITAL RADIO (DAB)
* " goes off).
.

ANALOG RADIO

Search for a station
1 Press B SRC to select TUNER.
2 Press J BAND repeatedly (or press
select FM1/ FM2/ FM3/ MW/ SW1/ SW2.
3 Press S / T (or press S / T (+) on RC-406) to search for a
station.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6)
(or press one of the number buttons (1 to 6) on RC-406).
Change the frequency steps
You can change the frequency step of:
FM: 50 kHz to 200 kHz
MW: 9 kHz to 10 kHz
1 Press and hold B SRC to turn off the power.
2 While pressing number buttons 1 and 5, press B SRC.
Release your fingers from the buttons after the display appears.
• To restore the initial setting, repeat the same procedure.
• When the frequency step is changed, the previously stored stations
in the memory are deleted.
AM– / #FM+ on RC-406) to
*
ENGLISH | 7