Specifications - Kenwood KDC-X700DAB Instruction Manual

Symptom Remedy
Sound is being • Reduce the distance between the unit and the Bluetooth
interrupted or skipped audio player.
during playback of a • Turn off, then turn on the unit and try to connect again.
Bluetooth audio player. • Other Bluetooth devices might be trying to connect to
the unit.
The connected • Check whether the connected Bluetooth audio player
Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP).
cannot be controlled. (Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
• "HF ERROR XX" Reset the unit and try the operation again. If this does
appears. not solve the problem, consult your nearest service
• "BT ERROR" appears. center.
TROUBLESHOOTING

SPECIFICATIONS

DAB Frequency Range L Band
Band III
Sensitivity
Signal-to-Noise Ratio
Antenna Connector Type
Antenna Output Voltage
Antenna Maximum Current
FM Frequency Range
Channel Space Selection
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
MW/ Frequency Range Band 1 (MW)
SW1/
SW2
Band 2 (SW1)
Band 3 (SW2)
Channel Space Band 1
Selection
Band 2/ 3
Usable Sensitivity MW
SW
1 452.960 MHz — 1 490.624 MHz
174.928 MHz — 239.200 MHz
–100 dBm
80 dB
SMB
14.4 V (11 V – 16 V)
< 100 mA
87.5 MHz — 108.0 MHz (50 kHz space)
87.9 MHz — 107.9 MHz (200 kHz space)
50 kHz/ 200 kHz
9.3 dBf (1.0 μV/75 Ω)
10.2 dBf (1.13 μV/75 Ω)
30 Hz — 15 kHz
75 dB
45 dB
531 kHz to 1 611 kHz (9 kHz space)
530 kHz to 1 700 kHz (10 kHz space)
2 940 kHz to 7 735 kHz (5 kHz space)
9 500 kHz to 10 135 kHz/
11 580 kHz to 18 135 kHz (5 kHz space)
9 kHz/10 kHz
5 kHz
28.0 dBμ (25 μV)
30 dBμ (32 μV)
ENGLISH | 21