I Progress Messages - Icom iF610 Instruction Manual

3
RECEIVING
' ' Progress messages
The following messages appear corresponding to the
progress of the processing of a call.
MESSAGE
ABORTED ......... Your call has been aborted (Wait for a
CALLING............ Your call is now being processed.
CALL BACK ...... Your call has been recorded at the
DIVERTED ......... Your call has been diverted to another
ENGAGED ......... The called station has not received
INVALID ............ You have entered an invalid number.
NO REPLY ......... Your call has not been answered.
QUEUED............ Your call has been put in the waiting list
RINGING............ The called station is now ringing.
SYS BUSY ......... The system is so busy that no call is
15
DESCRIPTION
while and then make the call again).
called station (Wait for a reply).
station.
your call since the line is busy (Wait for
a while and then make the call again).
(Wait for a while until your call is con-
nected).
accepted now (Wait for a while and
then make the call again).
MESSAGE DESCRIPTION
TIMEOUT ......... The communication time limit has been
exceeded (The communication has
already been ended).
FAILED ............ Your call has failed or your called num-
ber is not supported by the system.
CANCELLED ...... Your call has been cancelled.
CONNECTED...... Your call has been connected success-
fully.
SYS WIDE ......... System Wide calls are accepted now.
TELEPHONE ...... PSTN calls are accepted now.
PABX ............... PABX calls are accepted now.
INTER-PFIX ...... Calls from stations having different pre-
fix codes are accepted now.
CLEAR DOWN ... End the communication.