D Include Call; D Ptt Quick Call Function; I Making A Call Via The Keypad; D Individual Call - Icom iF610 Instruction Manual

2
OPERATION
D D Include Call
• After moving to the communication channel, you can make
an additional call to the other station for them join in to the
communication with you.
➥ Make a call with a memory individual/group call or make a
call via the keypad on the communication channel to start
the Include call.
D D PTT Quick Call function
The Despatcher, Status message, Call Back memory select-
ed by function key or the currently selected memory group
(current group) can be called only by push [PTT].

I Making a call via the keypad

Various calls can be made by the following keying sequences
via the keypad*.
*HM-152T optional DTMF microphone is required.
**Turn the 'DTMF Mic' function in the 'Common-Common'
menu of the cloning software to 'Enable' when using this
function. Please consult your dealer.
9
D D Individual Call
• Individual call to a station having the same prefix and
fleet codes.
Enter an individual code via the keypad and then push [#].
The individual call will be started.
(e.g.) To call 200 2001 300 from 200 2001 200, enter '300#'.
• Individual Call to a station having the same prefix code
and a different fleet code.
Enter the fleet code plus the individual code via the keypad
and then push [#]. The individual call will be started.
(e.g.) To call 200 2006 300 from 200 2001 200, enter
2006300#.
• Individual Call to a station having a different prefix
code.
Enter the prefix code plus the fleet code plus the individual
code via the keypad and then push [#]. The individual call
will be started.
(e.g.) To call 211 2006 300 from 200 2001 200, enter
2112006300#.
NOTE: Instead of pushing [#], push [PTT] can be also make
the call.