Straight Line Sawing - Husqvarna FS5000 D Operator's Manual

• Lower the saw by pushing the Raise/lower switch on the
speed control lever downwards until the blade touches the
surface to be cut. This will be the reference point.
CAUTION! The touch should be smooth to
!
prevent damaging the blade. Use Saw
lowering speed control knob to slow down
the lowering speed.
• Press the Blade zero button on the control panel. The
current value in the display now reads 0.
2
1 3
4
12
10 14
WORKING HOUR
8 16
V V
CURRENT: STOP:
0 0
cm cm
CURRENT:
0
cm
• Set the desired cutting depth by rotating the Depth knob.
The chosen cutting depth is now shown in the display in
small box called stop.
2
1
3
4
12
10 14 60
WORKING HOUR
8 16 40
V V
CURRENT: STOP:
0 4
cm cm
STOP
4
cm
• When the blade is lowered the current cutting depth will be
showing the difference between the reference point and
the diamond blade.
22 –
English
OPERATING
<1200 RPM
80
60 100
40 120
c c
<1200 RPM
80
100
120
c c
• The saw will not lower to any depth greater than the stop
position set in the display. If a deeper cut is required, turn
the Blade depth knob to a new depth position. You can
also disengage the Blade depth stop by pushing the Blade
depth stop button to override the depth stop feature.
2
1 3
4
12
10 14
WORKING HOUR
8 16
V V
CURRENT: STOP:
0 4
cm cm

Straight line sawing

While cutting, the blade is creating resistance to driving force
from rear wheels which will cause the machine to yaw in the
same direction as the blade is mounted on. This effect can be
counteracted by adjusting the angle of the rear axle using E-
track or manual axle adjustments.
Saw with E-track option
• On the control panel, push the E-track adjustment buttons
representing left and right rear axle adjustments. Press
several times for fine adjustments.
2
1 3
4
12
10 14
WORKING HOUR
8 16 40
V V
CURRENT: STOP:
0 4
cm cm
• By pressing the E-track zero button on the control panel
the rear axle will return to predefined center angle.
2
1 3
4
12
14
10
WORKING HOUR
8 16 40
V V
CURRENT: STOP:
0 4
cm cm
• Return to previous setting by once again pressing the E-
track zero button on the control panel.
<1200 RPM
80
60 100
40 120
c c
<1200 RPM
80
60 100
120
c c
<1200 RPM
80
100
60
120
c c