Biis Operation; I Default Setting; I Receiving A Call; D Individual Call - Icom IC-F1710 Instruction Manual

3

BIIS OPERATION

I Default setting

The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
NOTE: [TX Code Enter] must be assigned to a key.
P0 P1 P2 P3
[P0]; Call
[P1]; Digital
[P3]; TX Code Enter
[P4]; Moni(Audi)
[P2]; Null
[Up]/[Down]/[DIAL]; CH Up/Down
14
In this instruction
manual, these keys
are from the left,
called
P4
[P2]/[P3]/[P4].
: Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-
tone or BIIS channel.
: Push to select the call list ID/transmit
message, or to display the receive
message record for selection.
: Push to enter the ID code edit mode
directly for both 5-tone and BIIS.
: Push this key after the communica-
tion to send a 'Clear down' signal
during BIIS channel operation.
: No function is assigned.
: While in the standby condition,
selects the operating channel.
After pushing [Digital] or [TX Code
CH Select], selects call list or TX
code channel, respectively.

I Receiving a call

D D Individual call
q When an individual call is received;
• Beeps sound.
• " " appears and the mute is released.
• The programmed text message (e.g."
station ID (or text) is displayed when the indication mode is 2
lines.
• The programmed text message (e.g."
[P0]/[P1]/
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
• " " appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
• TX indicator lights red.
e Release [PTT] to return to receive.
• BUSY indicator lights green while receiving a signal.
r To finish the conversation, push [P4] (Moni(Audi)) to send
the 'Clear down' signal.
• Either station can send a 'Clear down' signal.
• "
• " " disappears and the transceiver returns to the standby con-
dition.
Appears Appears or blinks
C A L L I N G
0 5 0 0
" is displayed for 2 sec. (approx.).
") and the calling
") and the calling