Character Pitch 15 CPI
ASCII Code
ESC g
HEX Code
1B 70
Purpose
Sets character pitch to 15 characters per inch (cpi).
† Comment
This command is not defined in Epson printers. It is included in this
emulation for compatibility with the Okidata KX–P1180 printer.
Select Serif or Sans Serif Font
ASCII Code
ESC k n
HEX Code
1B 78 n
Purpose
To select an NLQ font.
where
n = hex 0, hex 30, hex 1, or hex 31 selects a sans serif NLQ font
† Comment
In the LG06 and LG12, this command is ignored because the NLQ
fonts are sans serif. In Epson printers, n = hex 0 or 30 selects a
roman NLQ font with serifs, while n = hex 1 or 31 selects a sans
serif NLQ font.
Select NLQ or Draft Font
ASCII Code
ESC x n
HEX Code
1B 78 n
Purpose
To select correspondence or draft printing mode.
where
n = hex 0 or hex 30 selects draft mode
n = hex 1 or hex 31 selects NLQ mode
Comment
When you select NLQ mode, the font is sans serif. Fonts selected
with this command override control panel selections.
Epson FX Emulation
9–45