Operating The Appliance - Electrolux EHD68210P User Manual

Displays
Display
Residual heat
Fault
+ number
Pan detection
Automatic switch off
Residual heat indicator
Warning! Risk of burns from residual
heat. After being switched off, the
cooking zones need some time to cool
down. Look at the residual heat indicator
.

Operating the appliance

Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
Control panel
To switch
Touch
on
To switch
Touch
off
After switching on, within approx. 10
seconds a heat setting or a function
must be set, otherwise the appliance au-
tomatically switches itself off.
Setting the heat setting
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct up or down, if
necessary. Do not release before the desired
heat setting is reached.
Locking/unlocking the control panel
The control panel, with the exception of the
"On/Off" sensor field, can be locked at any
Indicator lights up. The operational readiness indicators of
for 1 second
the individual cooking zones also light up.
Indicator goes out. The operational readiness indicators of
for 1 second
the individual cooking zones also go out.
Description
Cooking zone is still hot
Malfunction has occurred
Cookware is unsuitable or too small or no cookware
has been placed on the cooking zone
Switch off is active.
Residual heat can be used for melting
and keeping food warm.
The induction cooking zones create the
heat required for cooking directly in the base
of the cookware. The glass ceramic is merely
heated by the residual heat of the cookware.
Display
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
electrolux 5
B