Electrolux EHD68210P User Manual page 6

6 electrolux
To switch on
Touch
To switch off
Touch
When you switch the appliance off, the locking function is automatically switched off.
Switching the STOP+GO function on and
off
The STOP+GO function simultaneously
switches all cooking zones that are switched
Control panel
To switch on
Touch
To switch off
Touch
STOP+GO does not stop the Timer
function.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. When setting a
heat setting using the automatic warm-up
Step
1.
Select warm-up setting
2. Select the desired heat setting be-
tween 1 and 8
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting
Control panel
Heat setting that was previously set (not automatic warm up
function)
Control panel
1
2
3
4
5
6
7
8
9
Indicator lights up
Indicator goes out
on to the keep warm setting and then back
to the heat setting that was previously set.
Display
STOP+GO locks the whole control panel
except the sensor field
function, the cooking zone switches to full
power for a certain amount of time and then
automatically switches back to the heat set-
ting set.
Display
display flashes
The desired heat setting is displayed.
lights up.
As long as the display is lit, the appliance is
working at full power.
After the automatic warm-up is completed, the
display goes out.
Length of the automatic warm up [min:sec]
Display
.
display
0:12
0:12
3:07
5:51
10:12
2:01
2:28
2:52
---