Yowza JUNO Operating Instructions Manual page 33

COMPUTER OPERATION
START
Press to start exercise initial speed 0.5 ml/0.8 km.
STOP / ENTER
1. Press to confirm program and preset function values under setting mode.
2. Press to quit preset program and function value after complete single program.
3. Setting procedure: returns to beginning of setting mode before pressing the START key.
4. Press to stop exercise during workout time.
SPEED UP / DOWN BUTTON
1. Press to increase/decrease exercise speed by 0.1ml /km.
2. Hold the button to increase/decrease rapid speed by 0.5ml/km per second and release the button to stop the function.
Press to select programs and preset related function value.
INCLINE UP/DOWN BUTTON
1. Press to increase/decrease incline level.
2. Hold the button to increase/decrease incline level per second and release the button to stop the function.
EXPRESS SPEED BUTTON
Press the quick speed button to select the target speed.
EXPRESS INCLINE BUTTON
Press the quick incline button to select the target incline.
MODE BUTTON
Please MODE button the exchange the display
IMPORTANT
· The console display will turn itself off automatically about five minutes after the bell has stopped moving.
· The pulse function is for reference only, and not to be used for medical purposes.
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key and attach
the clip to your clothing waist before beginning your workout.
If you should encounter problems and need to stop the motor quickly, simply pull on the cord the disengage the safety key from the
console. To continue operation simply turn the power switch to off, set the speed controller to stop and then reinsert the safety key
into the console.
http://www.yowzafitness.com/ 33