3 F1245 – at your service
Set the indoor climate
Overview
Sub-menus
For the menu
ation for the relevant menu can be found on the display to the right of the
menus.
temperature
formation shows the set values for the climate system. Tab for cooling system
is only displayed if accessory for cooling are present or if the heat pump has
the integrated cooling function.
ventilation
setting. This menu is only displayed if the exhaust air module is connected
(accessory).
scheduling
"set" is displayed if you set a schedule but it is not active now, "holiday set-
ting" is displayed if the vacation schedule is active at the same time as the
schedule (the vacation function is prioritised), "active" displays if any part of
the schedule is active, otherwise it displays " off".
advanced
value of supply temperature, room sensor and cooling function.
22
Chapter 3 |
INDOOR CLIMATE
temperature
ventilation
scheduling
advanced
INDOOR CLIMATE
Setting the temperature for the climate system. The status in-
Setting the fan speed. The status information shows the selected
Scheduling heating, cooling and ventilation. Status information
Setting of heat curve, adjusting with external contact, minimum
F1245 – at your service
1
normal
off
there are several sub-menus. Status inform-
NIBE™ F1245