LG LW342 series Owner's Manual page 37

Operation and settings
RTP stream
RTP (Real-time Transport Protocol) is an internet protocol
that allows programs to manage the real-time transmission
of multimedia data, via unicast or multicast.
Master / Slave
> RTP unicast: When enabled the transmis-
sion of the data to the specified equipment
happens on a network specifying a single
address.
> RTP multicast: When enabled it reduces the
transmission load on the camera by making
the computer of the same segment network
receive the same transmission data. When
multicast option is checked then select
Video Port number, Audio Port number and
Data port number.
- Video RTP port: Specify the video
transmission port number used for the
multicast streaming. It is initially set
to 8 888 and you can edit this between
1 025 and 65 534.
- Audio RTP port: Specify the audio
port number used for the multicast
streaming. It is initially set to 7 778 and
you can edit this between 1 025 and
65 534.
37