Code Dump Mode - IBM 6400 Operation Manual

Code Dump Mode

The code dump mode allows you to print
all the data the controller receives from the
IBM system in a hexadecimal format.
Entering Code Dump mode
To access the Code Dump mode provided
by the controller:
1
Power off the printer.
2
Set the ADDRESS switch to address
7.
3
Power on the printer. After the MPI
configuration has printed, set the
ADDRESS switch on the interface I/O
to the device's current address (0-6)
on the host system.
In order to use the "Code Dump Mode", the
MPI must be receiving data from the host
computer.
Multi–Platform Interface Feature Operation Guide
twinax code dump mode
note
37