Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
#2 Phillips screwdriver
Adjustable wrench that
opens to 1" (2.54 cm) or
hex-head socket wrench
(for adjusting dryer feet)
Remove parts package from dryer drum. Check that all parts are
4 Leveling legs
NOTE: Do not use leveling legs if installing the dryer on a
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements" and "Venting Requirements"
before purchasing parts.
For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see "Plan Vent System" section for
Mobile home installations require metal exhaust system hardware
available for purchase from your local Sears store or Sears
Service Center. For further information, please call
Caulking gun and
compound (for installing
new exhaust vent)
Tin snips (new vent
¼" nut driver or socket
Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4 cm) pedestal or a 15.5" (39.4 cm)
pedestal with a storage drawer. The pedestal will add to the total
height of the dryer for a total height of approximately
46" (116.8 cm) or 51.5" (130.8 cm), respectively.
For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor. You will need to
place the 15.5" (39.4 cm) pedestal at least 3" (7.6 cm) above the
Optional pedestal (15.5" [39.4 cm] model shown)
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME
10" (25.4 cm)
15.5" (39.4 cm)