Machine Storage - Bissell Pawsitively Clean yowza 94U5 SERIES User Manual

o
perations
Hard Floor Cleaning continued
10. When finished, remove hard floor tool,
rinse and let dry before storing. Refer to
the "Maintenance and care" section on
page 12 for machine clean up and stor-
age instructions.
M
aintenance and care
Machine care
For best results, a few simple steps can
assure your machine is well maintained
after your cleaning is complete.
1. Turn power switch OFF. Unplug the machine
and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse
it with running hot tap water, taking care to
clean underneath and around the heavy duty
bladder. Clean out red lint screen. Removable
nozzle may be rinsed if necessary. Refer to
page 9.
3. Replace the 2-in-1 water tank on the machine.
4. Any loose hair or debris can be pulled from
the brush roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from a bowl. Before wrapping back
on machine, lift end of hose and stretch out to
ensure all water is cleared from hose. Refer to
page 10, illustrations 11 and 12.
6. Wipe the machine's exterior with a soft cloth.
7. After carpet is dry, vacuum again to remove
hair and fuzz.

Machine storage

Put the unit away in a closet or base-
ment for the next use. Store cleaner in
a protected, dry area. Since this product
uses water, it must not be stored where
there is a danger of freezing. Freezing
will damage internal components and
void the warranty.
12
w w w . b i s s e l l . c o m