Hard Floor Cleaning - Bissell Pawsitively Clean yowza 94U5 SERIES User Manual

o
perations
Cleaning with Deep Reach™ Tool continued
2.
Slowly move the tool back and forth over
the soiled surface, keeping the tool in contact
with the carpet.
3
Release spray trigger and move tool slowly
over the soiled area to suction up water
and dirt.
4. Continue to clean the area, working in small
sections, until no more dirt can be removed.

Hard Floor Cleaning

Your deep cleaner may have come
with a hard floor tool and Hard Floor
Solutions Formula. The hard floor tool
provides effective cleaning for linoleum,
vinyl, and tile floors. Caution: Do not
use on unsealed hardwood floors.
1. Thoroughly vacuum or sweep floor to
pick up any debris.
NOTE: Prior to filling 2-in-1 water
tank, be sure all carpet cleaning
formula is thoroughly rinsed
from tank.
2. Fill with Pawsitively Clean or
BISSELL Sealed Hard Floor Formula to
the indicated fill line in the built
in measuring cup and pour into mouth
of bladder.
3. Fill the bladder with clean hand hot tap
water and set aside.
4. Attach the hard floor tool to the bottom
of the machine by hooking it into the
nozzle and swinging it down until it
clicks into place.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power
ON.
7. Plan your cleaning route to leave an exit
path. Be sure to allow adequate time for
floors to dry.
8. While pressing the spray trigger, make
one slow forward wet pass and another
back.Caution: Do Not Overwet.
9. Repeat the motion without pressing the
spray trigger, using the hard floor tool
to squeegee and suction up the dirty
water.
w w w . b i s s e l l . c o m
3.
CAUTION:
Do not use on unsealed
hardwood floors.
11