Pilot Flame Characteristics; Main Burner Flame Characteristics - HouseWarmer HWDV080DVN-2 Installation Instructions And Owner's Manual

Direct vent wall furnace
Table of Contents

Advertisement

1
PILOT
FLAME

Main Burner FlaMe cHaracteriSticS

1
27536-0-0610

PilOt FlaMe cHaracteriSticS

MAIN BURNER
THERMOCOUPLE
The pilot flame is blue and goes toward the main burner 
and thermocouple horizontally.  A slight yellow tip on the 
flame is normal.  The pilot flame must  surround and extend 
approximately 1/4" (6 mm) beyond the thermocouple, and
must extend beyond the first row toward the second row 
of main burner ports.
BURNER
CHANNEL
On the main burner, the burning gas forms a primary
flame and a secondary flame.  The primary flame is blue 
and  about  3/16"  (5 mm)  high.   The  secondary  flame  is 
very pale blue, 3" (76 mm) to 5" (127 mm) high. Dust in
the combustion air will produce an orange flame.  Do not 
mistake it for an improper yellow flame.
Page 39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents