HouseWarmer HWDV080DVN-2 Installation Instructions And Owner's Manual page 30

inStallatiOn OF OPtiOnal BlOWer Kit HW125ScB
4
5
Page 30
Insert blower into bottom of heater, slide blower bracket into the
two location stabilization tabs and attach with four (4) screws
(provided).
note:
Insert power cord through the hole in the bottom of the heater.
ROUTE CORDS
THROUGH
BOTTOM HOLE
It is necessary to use all four (4) screws to tighten down
the blower in order to reduce vibration noise.
27536-0-0610