10
11
(2) SCREWS
12
13
Place one (1) nylon washer on each peg of the casing door. Replace casing door.
Page 20
interiOr inStallatiOn
GAS LINE
Line up the two (2) tabs on the top of the wall mounting plate
with the holes in the back of the unit. Slide the back of the unit
onto the tabs of the wall mounting plate.
Secure the back of the unit into place using two (2) screws.
Place one white nylon washer (provided) on each peg on the
casing door. Replace casing door.
After the back of the unit is attached to the wall, bring in the
gas line as shown on page 18, or follow the installation template
indications. Following your city, local and state codes, attach the
gas line to the unit.
CAUTION: Grasp wrench on regulator when installing gas in-
let.
nOte: The gas line can come through the wall or floor of the
house.
27536-0-0610