Heat & Glo 6000CL-IPI-S Owner's Manual page 28

Top Vent - Vertical Termination
No Elbow
V = 40 ft. Max. (12.4 m)
1
V = 3 ft. Min. (914 mm)
1
Note: If installing a vertical vent/
termination off the top of the appli-
ance, the fl ue restrictor should be
used. See Figure 7.9.
Figure 7.6
28 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. F • 11/09
V
1
Flue Restrictor Instructions
1. Remove the top piece of refractory, if already installed.
See Figure 7.7.
TOP
REFRACTORY
Figure 7.7
2. Break the fl ue restrictor into two pieces. Do this by
bending the part back and forth until it breaks (see
Figure 7.8).
BREAK
HERE
Figure 7.8 Flue Restrictor
FLUE
RESTRICTOR