Table of Contents
Advertisement
Figure 65. Adding an Exit Program — Display 1
Step 2: Select the Add Exit Program option
Select the add option by typing a
Figure 66.
Figure 66. Adding an Exit Program — Display 2
Step 3: Add your exit program
Fill in the exit program information as shown in Figure 67 on page 84 and
Figure 68 on page 84, then press enter.
Notes:
1. You can bypass Steps 1 and 2 by using the Add Exit Program (ADDEXITPGM)
command.
2. You must set the Program number parameter of the Add Exit Program
(ADDEXITPGM) command to
3. When you add exit programs for FTP clients, these programs take effect as
soon as you start additional sessions. Changes do not affect client sessions that
are already running.
4. When you add FTP server exit programs, end and restart the FTP servers to
ensure that all servers are using the exit programs.
(Add) in the Opt column as shown in
when adding exit programs to FTP exit points.
Appendix B. TCP/IP Application Exit Points and Programs
83
Advertisement
Table of Contents
