Table of Contents
Advertisement
6. Select option 50 (Display log for messages) to verify that you have installed the
To use TCP/IP, you must configure it after you have completed the installation.
See "Configuring TCP/IP using the EZ-Setup Wizard" on page 9.
Using the TCP/IP Administration Menu
The TCP/IP Administration menu (Figure 1) is a starting point for the
configuration tasks. To display the menu, enter GO TCPADM from the iSeries
Main Menu.
Figure 1. TCP/IP Administration Menu
Following are descriptions of the menu options.
v Option 1. Configure TCP/IP: Displays the Configure TCP/IP menu. Use the
v Option 2. Configure TCP/IP applications: Displays the Configure TCP/IP
v Option 3. Start TCP/IP: Select this option to issue the Start TCP/IP (STRTCP)
v Option 4. End TCP/IP: Select this option to issue the End TCP/IP (ENDTCP)
6
OS/400 TCP/IP Configuration and Reference V5R1
v Automatic IPL
The Automatic IPL option determines whether the system automatically
starts when the installation process has completed successfully.
When TCP/IP successfully installs, either the
menu or the
licensed program successfully. If an error occurs, you will see the message
with Licensed Programs display.
options on this menu to configure your local server to communicate with other
systems in a TCP/IP network.
Applications menu. Use the options on this menu to configure the TCP/IP
licensed program (5769-TC1) applications installed on your system.
command. This command initializes and activates TCP/IP processing, starts the
TCP/IP interfaces, and starts the TCP/IP server jobs.
command. This command is used to end all TCP/IP processing on this system.
display appears.
on the bottom of the Work
Advertisement
Table of Contents
