Table of Contents
Advertisement
Figure 24. Work with TCP/IP Network Status
Work with TCP/IP Interface Status
The Work with TCP/IP Interface Status display, as shown in Figure 25, provides
the most current summary of interface activity. This display allows you to view
TCP/IP interface information for selected interfaces and to start or end TCP/IP
interfaces. To view the Work with TCP/IP Interface Status display, take these steps:
1. Type 1 on the command line of the Work with TCP/IP Network Status menu
or enter the
command.
2. Press the Enter key.
Figure 25. Work with TCP/IP Interface Status, Display 1 of 2
Press F11 to change the contents of the display to include the subnet mask, type of
service, maximum transmission unit (MTU), and line type, as shown in Figure 26
on page 35.
34
OS/400 TCP/IP Configuration and Reference V5R1
Advertisement
Table of Contents
